Assigning A Custom Paper Type; Printing; Printing Documents; Printing A Document - Lexmark MS310 Quick Refence Manual

• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Paper Menu > Custom Types.
3
Select a custom paper type name, and then select a custom paper type.
Note: Plain Paper is the factory default paper type for all user‑defined custom names.
4
Click Submit.
Using the printer settings on the computer
Depending on your operating system, access the Custom menu using the Local Printer Settings Utility or Printer
Settings.

Assigning a custom paper type

Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The
IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Paper Menu.
3
From the Tray Configuration section, select a paper source, and then select a custom paper type under the paper
type column.
4
Click Submit.
Using the printer settings on the computer
Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or Printer
Settings.

Printing

Printing documents

Printing a document

1
From the Embedded Web Server or your computer, set the paper size and type in the Paper menu to match the
paper loaded in the tray.
Note: If the printer is not connected to a network, then access the Paper menu using Local Printer Settings
Utility or Printer Settings, depending on your operating system.
2
Send the print job.
21