Lexmark MS310 Quick Refence Manual page 14

4
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
5
Load the paper stack.
Note: Make sure the paper is below the maximum fill indicator located on the side of the width guide.
Notes:
• Load recycled or preprinted paper with the printable side facedown.
•
Load prepunched paper with the holes on the top edge toward the front of the tray.
• Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two‑sided
printing, load letterhead faceup with the bottom edge of the sheet toward the front of the tray.
1
14
2