Udp Settings - Gefen 4K ULTRAHD EXT-UHD-88 User Manual

Use this menu option to enable / disable UDP access, set the UDP port, UDP remote
access, and setting the remote UDP IP address.
1. Go to the routing screen. If the routing screen is not displayed, then press
the Back button on the front panel or on the IR remote control until the routing screen
is displayed.
2. Press and release the Menu button on the front panel or on the IR remote control.
The Menu button, on the front panel, will momentarily flash blue when it is pressed.
®
Setup
4K Ultra HD 8x8 Matrix for HDMI w/ HDCP 2.2
EXT-UHD-88 Power
IP Control IR In/Ext
A B
C D
RS-232
E F
G H Mask
Output
Menu Preset
OK
Back Lock
1 2 OFF
3 4
5 6
7 8
Input
*Preferred
®
RMT-88
6. Press the Enter button on the front panel or the OK button on the IR remote control
to display the UDP Access screen. The current setting will be displayed.

UDP Settings

Menu
Enter
Back
2. The Setup menu will be displayed:
Out A Out B Out C Out D
setup
In 1 In 2 In 3 In 4
3. Press and release the ▲ or ▼ buttons on the
front panel or on the IR remote control,
to select the Network menu:
network
4. Press the Enter button on the front panel.
If using the included IR remote control, press the
OK button.
Press the ▲ or ▼ buttons on the front panel or on
5.
ON
the IR remote control to select the UDP Settings
1 2
menu.
udp settings
page | 47
Preset
IR
Lock
Out E Out F Out G Out H
In 5 In 6 In 7 In 8
Menu System
Power
24V DC