1. Manuals
  2. Brands
  3. CHIEF Manuals
  4. Racks & Stands
  5. CTV-3036
  6. Installation instructions manual

CHIEF CTV-3036 Installation Instructions Manual

Tv/monitor mount
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
I N S T A L L A T I O N
The CTV-3036 series mounts are used to mount TV/monitors to
ceilings and walls.
Adjustments include forward pitch, swivel, roll, and tray/height.
The CTV mounts are offered in two model numbers. The model
number matches the screen size range that fits the mount. Each
mount has a different maximum weight capacity, depending
upon the TV/monitor size.
The CTV mount specifications are provided on page 2 in this
document.

BEFORE YOU BEGIN

•
CAUTION: To prevent damage to your monitor, which could affect or void the Factory warranty,
thoroughly study all instructions and illustrations before you begin to install the mount brackets. Pay
particular attention to the Warnings and Cautions in this document.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or
952-582-6480.
•
The CTV-3036 is UL listed when used with the following UL listed accessories made by Chief Manufacturing:
CMA-100
8"Ceiling Plate with Attached Adjustable
1-1/2" NPT Column
CMA-110
8"Ceiling Plate with 1-1/2" NPT Opening
CMA-115
6"Ceiling Plate with 1-1/2" NPT Opening
CMA-330
Offset Ceiling Plate
CMA-345
Structural Ceiling Plate with Flexible Joints
CTV-3036
TV/MONITOR MOUNT
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
I N S T R U C T I O N S
CTV-3036 Series Mount
CMA-362
C-Clamp
CMA-395
100 Degree Angled Ceiling Plate with Threaded Coupler
CMA-0xx
Fixed Extension Columns
CMA-0xx
Adjustable Extension Columns
QD-1
Quick Disconnect
8809-000023 (Rev. B)
2004 Chief Manufacturing
www.chiefmfg.com
1/05

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CTV-3036 and is the answer not in the manual?

Questions and answers

Related Manuals for CHIEF CTV-3036

Summary of Contents for CHIEF CTV-3036

  • Page 1: Before You Begin

    If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480. • The CTV-3036 is UL listed when used with the following UL listed accessories made by Chief Manufacturing: CMA-100 8”Ceiling Plate with Attached Adjustable 1-1/2” NPT Column...

  • Page 2: Mount Specifications

    Installation Instructions CTV-3036 MOUNT SPECIFICATIONS (H) Height, (W) Width, and (D) Depth Table 1. Mount Specifications TV/Monitor D-Tray Screen W-Width H-Height Depth Support Model Size Adjustment Adjustment (fixed) Weight 300 lbs CTV-3036 30” – 36” 28” – 36” 21.75” – 34”...

  • Page 3: Table Of Contents

    Installation Instructions CTV-3036 IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions.

  • Page 4: Tools Required For Installation

    Installation Instructions CTV-3036 Table 2. Parts List TOOLS REQUIRED FOR ITEM DESCRIPTION INSTALLATION Tray, Center • Phillips screwdriver Tray, Left • Pipe Wrench Tray, Right • M3 Allen Wrench (included) Bottom Side Bracket NOTE: Other tools may be required depending on your Button Plate method of installation.

  • Page 5: Parts

    Installation Instructions CTV-3036 PARTS Figure 1. CTV-3036 Piece Parts Assembly Figure 2. CTV Hardware Kit...

  • Page 6: Installation Instructions

    Installation Instructions CTV-3036 INSTALLATION INSTRUCTIONS STEP 1 (20) (10) (30) (DD) (CC) Figure 3. Attach End Trays to Center Tray (20) (10) Figure 4. Interlock the Flanges on Center Tray Assembling the Tray Assembly Assemble the tray assembly, as follows: 1.

  • Page 7: Adjusting The Button Plates On Side Brackets

    Installation Instructions CTV-3036 STEP 2 Adjusting the Button Plates on Side Brackets Adjust button plates on side plates, as follows: 1. Determine the height of your monitor. If necessary, use a tape measure. 2. Attach mounting button (60) and button plate (50) to bottom side bracket (40) using the correct hole depending on screen height.

  • Page 8: Assembling The Side Brackets

    Installation Instructions CTV-3036 STEP 3 Assembling the Side Brackets Assemble the side brackets, as follows: 1. Insert one M6 X 25mm flat head cap screw (EE) into countersunk hole on the bottom side bracket (40). NOTE: Shorter screens may require the use of the lower countersunk hole for roll out and top placement bracket installation.

  • Page 9: Attaching Side Brackets To End Trays

    Installation Instructions CTV-3036 STEP 4 Attaching Side Brackets to End Trays Attach side brackets to end trays, as follows: NOTE: The top mounting area (size) of your monitor is required to determine which set of end tray (90) mounting holes to use.

  • Page 10: Placing The Monitor On The Center Tray

    Installation Instructions CTV-3036 STEP 5 Placing the Monitor on the Center Tray Place the monitor on the center tray, as follows: 1. Determine the width of your monitor (see Figure 11). If necessary, use a tape measure. 2. Slide the end plates (20 and 30) to match the width of your monitor.

  • Page 11: Assembling The Top Center Bracket

    Installation Instructions CTV-3036 STEP 6 Assembling the Top Center Bracket Assemble the top center bracket, as follows: 1. Locate the top center bracket (120) and the other two mounting buttons (60). See Figure 13. 2. Install the two mounting buttons onto the threaded studs on the top center bracket (120).

  • Page 12: Attaching Center Tray

    Installation Instructions CTV-3036 STEP 7 Attaching Center Tray Attach center tray bottom side brackets, as follows: Center Tray 1. Connect the mounting buttons on the bottom side brackets (40) to the buttonholes on the LH and RH brackets (130 and 140). See Figure 15.

  • Page 13: Installing Quick-Connect Bracket

    Installation Instructions CTV-3036 STEP 9 Installing Quick-Connect Bracket Assemble quick-connect bracket, as follows: 1. Locate the quick-connect bracket (150) and the 1.5” NPT standard pipe (160). See Figure 18. WARNING NPT and MPT (male external) pipes must be properly installed in accordance to local building codes and ordinances.

  • Page 14: Disconnect And Remove Ctv Mount

    Installation Instructions CTV-3036 STEP 10 (OPTIONAL) Disconnect and Remove CTV Mount Disconnect the quick-connect bracket and remove the CTV mount (for servicing the monitor), as follows: WARNING: Monitors are usually heavy and difficult to move. Exercise extreme caution when moving the monitor to avoid personal injury and/or equipment damage.

Table of Contents