Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CHIEF MSP-BBST
Summary of Contents for CHIEF MSP-BBST
-
Page 2: Weight Specifications
Installation Instructions MSP-BBST IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions. -
Page 3: Table Of Contents
Installation Instructions MSP-BBST TOOLS REQUIRED FOR CONTENTS INSTALLATION WEIGHT SPECIFICATIONS..........2 • Phillips screwdriver TOOLS REQUIRED FOR INSTALLATION....3 TILT MOUNT KIT ............4 • Drill and drill bits Tilt Mount Without Bracket Adapters......5 NOTE: Other tools may be required depending on your Tilt Mount With Bracket Adapters.......5... -
Page 4: Tilt Mount Kit
Installation Instructions MSP-BBST TILT MOUNT KIT Unpack the carton. Verify the kit contents shown in Table 2. Read installation instructions completely. If you are missing any of the listed components, please contact Customer Service at 1-800/582-6480. Table 2. Tilt Mount Kit... -
Page 5: Tilt Mount Without Bracket Adapters
Installation Instructions MSP-BBST Tilt Mount Without Bracket Adapters 75mm x 75mm VESA CHART (WITHOUT BRACKET ADAPTERS) VESA HOLE FLUSH RECESSED PATTERN HOLE HOLE MOUNT MOUNT X 75 X 100 100mm x 100mm X 100 200mm x 100mm Tilt Mount With Bracket Adapters... -
Page 6: Installation
Installation Instructions MSP-BBST INSTALLATION The following procedures describe how to install the tilt mount. NOTE: Read “Warnings and Cautions” on Page 2. Wall Stud Installation (Step 1) Install the wall bracket on a wall stud, as follows: 1. Determine the exact mounting location prior to installation, considering screen size as well as the mount swing and extension radius. -
Page 7: Flush Mount (Without Bracket Adapter)
Installation Instructions MSP-BBST Flush Mount (Without Bracket Adapter) To attach the VESA bracket using the recessed mount procedure, do the following: 1. Place the VESA bracket (10) on the display. 2. Align the hole-pattern of your display with the hole-pattern on the VESA bracket (10). -
Page 8: Recessed Mount
Installation Instructions MSP-BBST Recessed Mount To attach the VESA bracket using the recessed mount procedure, do the following: 1. Refer to the applicable table (listed below) and select six screws and six spacers. • See to Table 3 for 75mm/100mm and 100mm/100mm compliant displays. -
Page 9: Flush Mount (With Bracket Adapter)
Installation Instructions MSP-BBST Flush Mount (With Bracket Adapter) To attach the VESA bracket using the recessed mount procedure, do the following: Table 5. 200mm /200mm Compliant Displays 1. Select the two bracket adapters (120), four washers (130), and four screws (refer to the... -
Page 10: Mounting The Display On The Wall Bracket (Step 3)
Installation Instructions MSP-BBST Mounting the Display on the Wall Bracket (Step 3) To mount the display on the wall bracket, do the following: 1. With an assistant (if necessary), lift the display up to the wall bracket (20) over the four mounting pins. - Page 12 Savage, MN 55378, USA Zekeringstraat 17, 1014 BM PHONE: 800.582.6480 Amsterdam, Netherlands PHONE: 952.277.3901 PHONE: 31 (0)20 5708923 FAX: 952.894.6918 FAX: 31 020 5708989 FAX: 877.894.6918 europe@chiefmfg.com www.chiefmfg.com ©2005 Chief Manufacturing Inc. All rights reserved. 9/05 Patents and patents pending. 8832-000091 (Rev. B)
Need help?
Do you have a question about the MSP-BBST and is the answer not in the manual?
Questions and answers