Setting Up Your Microphone With Pivot Mount & Desk Stand - Audio Technica AT2020USBi Instruction Manual

AT2020USBi
1. Capsule — Condenser microphone element with cardioid polar pattern
2. Blue LED — Blue light shows microphone is receiving USB power
3. Mic Gain Control — Dial controls input level
Metal Construction — Tough, durable, resilient design
4.
5. Digital Output Connector — Use the included USB or Lightning cable to connect AT2020USBi
to your Mac, PC, iPad or iPhone
6. USB Cable
7. Lightning Cable
Setting up your microphone with included pivot mount and tripod desk stand
Screw the pivot mount onto the top of the tripod desk stand.
A.
B. Place the tripod desk stand on a flat surface. (The tripod legs will extend to provide a wide,
secure base.)
C. Install the AT2020USBi microphone into the threaded collar of the pivot mount and tighten
collar while holding the microphone in place. The front of the microphone should be facing the
sound source. (A blue LED indicate the front of the microphone; the product model number is
displayed on the rear of the microphone.)
D. If necessary, adjust the microphone's angle with the pivot mount's thumbscrew.
Plug the provided USB or Lightning cable into the digital output at the base of the microphone.
E.
Note: Many recording software programs are available online. Audacity is widely used free software
for recording and editing sounds. It is available online at http://audacity.sourceforge.net/
4
1
2
3
4
5
6
7