Preparation For Web Remote; Connecting The Microphone With The Control Device; Setting Up Locate - Audio Technica ATND1061 User Manual

Web Remote

Preparation for Web Remote

Connecting the microphone with the control device

1
Connect the control device with the microphone via a wired or wireless connection.
2
Perform network settings for the control device and connect to the network.
The microphone ships from the factory with "IP Config Mode" set to "Auto". To connect using a static IP
address, set "IP Config Mode" to "Static".

Setting up Locate

1
Download the Locate installer and application to the control device.
The installer can be downloaded from the Audio-Technica website (https://www.audio-technica.com/) for the
country or region where used.
2
Double-click the downloaded setup.exe.
The setup wizard will appear.
3
Follow the on-screen instructions to install Locate.
Once installed, a Locate icon will appear on the desktop.
4
Confirm that the microphone is connected to the same network as the control device before double-
clicking on the Locate icon.
Launch Locate. Microphones connected to the network are detected automatically.
5
Select the microphone to perform Web Remote control and click "Open".
The Setting & Maintenance screen will appear.
The "Identify" function is not available in Locate. Use Digital Microphone Manager for identifying connected
microphones.
59