Using Syslog; Setup - ZyXEL Communications P-660R-T1 Support Notes

Get Community= public
Set Community= public
Trusted Host= 192.168.1.33
Trap:
Community= public
Destination= 192.168.1.33
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Option Descriptions
Get Enter the correct Get Community. This Get Community must match the 'Get-'
Community
and 'GetNext' community requested from the NMS. The default is 'public'.
Set Enter the correct Set Community. This Set Community must ma
Community
'Set-community requested from the NMS. The default is 'public'
Enter the IP address of the NMS. The P-660 will only respond to
Trusted Host
messages coming from this IP address. If 0.0.0.0 is entered, the
respond to all NMS managers.
Trap
Enter the community name in each sent trap to the NMS. This Tra
Community
must match what the NMS is expecting. The default is 'public'.
Trap
Enter the IP address of the NMS that you wish to send the traps
Destination
entered, the P-660 will not send trap any NMS manager.

9. Using syslog

•
P-660 Setup
•
UNIX Setup
•
ZyXEL Syslog Message Format
P-660 Setup
Menu 24.3.2 - System Maintenance - UNIX S
UNIX Syslog:
Active= Yes
Syslog IP Address= 192.168.1.33
All contents copyright © 2005 ZyXEL Communications Corporation.
P-660 series Support Notes
yslog a nd Accounting
tch the
.
SNMP
P-660 will
p Community
to. If 0.0.0.0 is
88