Sony RM-B750 Operation Manual page 40

Locations and Functions of Parts
B LCD/touch panel
Normally displays the statuses
When you press and light the MONITOR button, it
displays the video signal from the connected camera
(SDTV signal only. HDTV signal will not be
displayed.).
In RM Menu, Camera Menu, or CCU Menu mode, the
selected menu is displayed to permit you to operate the
menu.
C Control knobs (rotary encoders)
In RM Menu mode, adjust the selected items on the
touch panel.
In Camera Menu mode, select and adjust the menu
items using the leftmost knob.
When the video signal from a camera is displayed on
the LCD, you can adjust the following items:
With the second knob from the left, you can adjust the
brightness of the picture being monitored.
With the third knob from the left, you can adjust the
contrast of the picture being monitored.
With the rightmost knob, you can adjust the vertical
position of the viewfinder character displays and
images. This function is valid when FUNCTION/
VF DISP and MAINTENANCE/VF MENU are set
to ON and the position setting is stored in memory.
You can enable/disable this function using the
Maintenance menu.
(The brightness and contrast of the menu display are adjusted with
the Maintenance menu items.)
8(E)
.
(see page 12(E))
qs Iris/master black control block
A AUTO IRIS
button
IRIS/MB
AUTO
ACTIVE MASTER
IRIS
B EXT indicator
EXT
C IRIS control
IRIS
A AUTO IRIS button
Press and light the button to automatically adjust the
iris according to the amount of input light.
If you press the button when lit, it goes dark, and
manual iris adjustment is enabled.
B EXT (lens extender) indicator
Lights when the lens extender or digital extender is
used on the connected camera.
C IRIS control
When the AUTO IRIS button is not lit, you can adjust
the iris manually by turning the control.
When the AUTO IRIS button is lit, you can fine-adjust
the reference value for automatic iris adjustment in a
range of ±2f with this control.
The adjustment mode of this control is specified at the
factory as Absolute mode, which can also be changed
to Relative mode using the RM Configuration menu
under the Maintenance menu
D IRIS/MB ACTIVE (iris/master black active)
indicator
Lights when the control mode is set as FULL or PART
mode with the PANEL ACTIVE button. When this
indicator is lit, iris/master black controls from this unit
are enabled.
E MASTER BLACK control
Manually adjusts the master black level.
The adjustment mode of this control is specified at the
factory as Relative mode, which can be changed to
Absolute mode using the RM Configuration menu
under the Maintenance menu
D IRIS/MB ACTIVE
indicator
E MASTER BLACK
control
BLACK
.
(see page 23(E))
.
(see page 23(E))