Connector Panel - Sony RM-B750 Operation Manual

qd White balance/black balance control block
AWB ABB
WHITE
BLACK
A AWB (auto white balance) button
Press to automatically adjust the white balance.
The button lights during adjustment and goes dark
when adjustment is completed.
If you press this button when lit, the automatic
adjustment is canceled, and the button flashes. To stop
the flashing, press the button again.
B ABB (auto black balance) button
Press to automatically adjust the black balance and
black set.
The button lights during adjustment and goes dark
when adjustment is completed.
If you press this button when lit, the automatic
adjustment is canceled, and the button flashes. To stop
the flashing, press the button again.
C WHITE (white balance) controls
Adjust the R/B white balance.
The adjustment mode of these controls is specified at
the factory as Relative mode, which can be changed to
Absolute mode using the RM Configuration menu
under the Maintenance menu
D BLACK (black balance) controls
Adjust the R/B black balance.
The adjustment mode of these controls is specified at
the factory as Relative mode, which can be changed to
Absolute mode using the RM Configuration menu
under the Maintenance menu
Notes
• When the adjustment mode of the BLACK or
WHITE controls is specified as Absolute mode,
automatic black or white balance adjustment with
ABB or AWB button is disabled.
• When the adjustment mode of the IRIS, MASTER
BLACK, WHITE, or BLACK controls is set to
Absolute (ABS), the background color of the
corresponding control value changes from white to
blue.
A AWB button
B ABB button
C WHITE controls
D BLACK controls
.
(see page 23(E))
.
(see page 23(E))

Connector Panel

1 CAMERA connector (8-pin)
Connect to the camera using the supplied remote
control cable.
2 MONITOR connector (BNC)
Connect to a color monitor to observe the signal from
the camera.
Connections
1
Loosen the cover fixing screw on the bottom and
open the cover.
1 CAMERA connector
2 MONITOR
connector
Cover fixing screw
9(E)