Sony RM-B750 Operation Manual page 45

Adjustment display (Paint menu)
When you select an item on the initial display of the
Paint menu, the lower half of the panel becomes the
adjustment display for the selected item.
Example: when you select "White" from the initial display of page 2
When you press this, the upper
half of the panel becomes the
monitor output setting display
(see the next page).
If the adjustment mode (VR Setting) for White or Black is
set to Absolute (ABS) mode, the background color of the
corresponding set values changes to blue, and control with
the knobs is disabled. The display shows the set value.
Submenu
If the selected item has many parameters, a submenu is
displayed.
Example: when you select "Skin Detail" from the initial display of page 3
Submenu
2 / 8
Clear
White Black Flare Gamma
WF/PIX
White RGB
Select
Color
RGB
Temp
R G B
0 0 0
2 / 8
Clear
V Mod Skin Black
Sat
Saw Detail Gamma
WF/PIX
Skin Detail
Select
1 2 3
Level Phase Width
0 0 0
Press to switch the parameters.
WF/PIX
Skin Detail
Select
1 2 3
Level Phase Width
0 0 0
The name of the item selected on the
initial display is displayed.
If you press this area after pressing
[Clear], all the adjustment values for the
selected item are initialized to standard.
When there are any ON/OFF functions
ATW
related to the adjustment, the names of
Master
the functions are displayed on this line.
12.0dB
The adjustment parameters for the
selected item and their adjustment
values are displayed.
You may adjust these items using the
corresponding control knobs.
If you press a value area after
pressing [Clear], that adjustment value
is initialized to standard.
Skin
DTL 1
Sat
0
Skin
DTL 2
Sat
0
13(E)