Opener Carton Inventory; Hardware Inventory - Chamberlain ATS 211 Owner's Manual

Your garage door opener is packaged in two cartons which contain all parts illustrated below. If anything is missing,
carefully check the packing material. Parts may be "stuck" in the foam. Hardware for assembly and installation is
listed below.
Mounting Hardware
(Rail Support Bracket)
"C" Wrap (2)
Safety Reversing Sensor (2)
(1) Sending Eye - (1) Receiving Eye
Straight
Door Arm
Chain
Pulley Bracket
Assembly Hardware
5/16"-18x1/2" Washered Screw, (2)
(Mounted in Opener)
1/4"-20x5/8" Hex Screw (2)
1/4"-20x5/8" Lock Washer (2)
#8-32x3/8" Screw (1)
5/16"-18x1/2" Washered Screw (2)

Opener Carton Inventory

Rail Support
Bracket
Lighted Door
Control Button
Safety Reversing Sensor
Mounting Bracket
With Slot (2)
Safety Reversing Sensor
Mounting Bracket
With Square Holes (2)
Trolley

Hardware Inventory

Installation Hardware
Hex Screw 5/16"-18x7/8" (4)
Nut 5/16"-18 (6)
Lock Washer 5/16" (6)
Rail Grease
Lag Screw 5/16"-18x1-7/8" (4)
Screw 6ABx1-1/2" (2)
Handle
Ring Fastener (3)
Carriage Bolt 5/16"-18x2-1/2" (2)
Insulated Staples (10)
Dry Wall Anchors (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1" (2)
Rope
Door Bracket Plate
Door Bracket
2 -Conductor Bell Wire
White & White/Red
Rail
Safety Labels
and
Literature
Hardware for Safety
Reversing Sensor
Lag Screw 1/4x1-1/2" (4)
Carriage Bolt 1/4"-20x1/2" (4)
Lock Nut 1/4"-20 (4)
Wing Nut (2)
Hex Screw 1/4-20x1-1/2" (2)
Screw #10-32x3/8" (4)
Lock Nut #10x32 (4)
Insulated Staples (20)
5
Header Bracket with
Clevis Pin and Fastener
Styrofoam
Chain
Curved Door Arm
2 -Conductor Bell Wire
with Connector (2 rolls)
White & White/Black