Attach The Rail To The Header Bracket - Chamberlain ATS 211 Owner's Manual

Installation Step 3

Attach the Rail to the Header Bracket

Header Wall
Header
Bracket
Chain
Pulley
Bracket
Garage
Door
Hardware Shown Actual Size
Clevis Pin
5/16" x 2-3/4"
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base.
If the door spring is in the way you'll need help.
Have someone hold the opener securely on a
temporary support to allow the rail to clear the
spring.
• Position the chain pulley bracket against the header
bracket.
• Align the bracket holes and join with a clevis pin as
shown.
• Insert a ring fastener to secure.
Rail
Clevis Pin
5/16"x2-3/4 "
10
Ring Fastener
Header Bracket
Chain
Pulley
Bracket
Rail
Temporary
Support
Ring Fastener