Table of Contents
Advertisement
1
CARTON INVENTORY
1. Instruction manual (this document)
2. Warning and risk of entrapment labels
3. Hardware bag
4. Release handle, cord and risk of entrapment card
5. 3 Channel mini transmitter
(1) MLR500 (2) MLR750
6. Wall or visor mounted transmitter
7. Stop collar
8. Clamp bracket and plate
9. Weight bar
10. Extension poles & brace (2)
1
5
4
7
9
3
DOOR REQUIREMENTS
The maximum allowable door height is 3.5m with a maximum curtain area of 8m² (MLR500) or 12.5m
(door height in metres multiplied by the width in metres). The door must be spring balanced.
The Protector System™ (IR Beams) must be installed if the force at the edge of the closing door exceeds 400N
(40kgf). Door axle diameter must not exceed 35mm.
Independent clamping method
Ensure that there is at least 45mm from the edge of the curtain to the edge of the bracket. If the roller door
drum is on the edge of the curtain or is a smaller diameter, additional clearance may be required.
If the drum is more than 60mm from the curtain edge or of a smaller diameter, extension poles may be
required (see section 7).
Different drum and bracket types may result in the minimum side room clearance not being possible and
extension poles being required. Ensure there is a power point near the opener.
2
3
6
8
10
fig A
2
TOOLS REQUIRED
1. Ladder
2. Adjustable wrench for U-bolts already installed
on the door
3. 8mm socket, 10mm socket and 13mm extended
socket and socket wrench
4. 300mm socket extension (for minimum side-room
installations)
5. Drill and 5.5mm drill bit
6. Phillips-head screwdriver
7. Marker pen
8. Door stand or similar device to safely support door
(not shown)
fig B
Direct clamping method
2
(MLR750)
2
Door area
h x w = m
2
eg. 2.5 x 3 = 7.5m
2
Advertisement
Table of Contents
