Print-Quality Settings; Print-Quality Mode - Xerox WorkCentre 3655 Troubleshooting Manual

Print-Quality Settings

The Print-Quality mode directly controls the quality of your prints. You can change these settings in the print driver. Select the
setting that is best for your print job.

Print-Quality Mode

• Standard is a high-speed, general-purpose mode for crisp, bright prints. Recommended for most office use and quick prints.
• High Resolution is a high-quality mode for fine lines and detail. Recommended for saturated prints. Balances quality over
speed.
• Toner Saver reduces the amount of toner used for print jobs and is useful for draft quality output. Print quality is slightly
lower than Standard.
Image Adjustments provide settings for each parameter, through slider controls. The sliders allow you to select a continuous range
of adjustment for each of the following:
• Lightness
• Contrast
Page 7 of 7