Table of Contents
Advertisement
PRE-INSTALLATION INSTRUCTIONS
INSPECTION FOR SHIPPING DAMAGE
You are responsible for filing all freight claims with the delivering truck line. Inspect all cartons and crates for
damage as soon as they arrive. If damage is noted to shipping crates or cartons or if a shortage is found, note
this on the bill of lading (all copies) prior to signing.
If damage is discovered when the cabinet is uncrated, immediately call the delivering truck line and follow up
the call with a written report indicating concealed damage to your shipment. Ask for an immediate inspection
of your concealed damage item. Crating material must be retained to show the inspector from the truck line.
INSTALLATION INSTRUCTIONS
It is the responsibility of the erector to install this walk-in using safe construction practice. The manufacturer is
not responsible for the performance of this walk-in if it is not installed in accordance with the instructions
detailed in this manual.
GENERAL INSTRUCTIONS
1. Be sure competent service people properly install the equipment.
2. Keep the equipment clean and sanitary so it will meet your local sanitation codes.
3. Rotate your stock so that older stock does not accumulate. A "First-In, First-Out" rotation practice will keep
the products in good salable condition.
4. Do not place product in the case when it is soft or partially thawed. Also, product should not be put in the
case for at least 6 hours after it is started.
5. Stock cases as quickly as possible, exposing only small quantities to store temperatures for short periods
of time.
6. When replacing burned out fluorescent tubes, be sure that the electrical power to the lighting circuit is
turned off.
NOTICE TO STORE OWNERS / MANAGERS
Moisture or liquid around, under, or inside the cabinet is a potential slip/fall hazard for persons
walking by or working in the general area of the cabinet. Any cabinet malfunction or housekeeping
problem that creates a slip/fall hazard around or under the cabinet should be corrected immediately.
If moisture or liquid is observed around, under, or inside a Master-Bilt cabinet, an immediate investigation
should be made by qualified personnel to determine the source of the moisture or liquid. The investigation
should determine if the cabinet is malfunctioning or if there is a drainpipe leaking.
6
Hide quick links:
Advertisement
Table of Contents
