Installation Of Handle; Installation Of Castors - Master Bilt SPT-28 Installation And Operation Manual

3. INSTALLATION OF HANDLE

1. Raise the COVER TOP as shown below.
2. Attach the HANDLE to the COVER TOP with screws included.
3. There are Handle and Screws in the attached Castor Box.
LID
COVER CABINET *TOP
DOOR
ROTATION
4. INSTALLATION OF CASTOR AND CASTOR BRAKE
1) Screw the castor (in rear side) and the castor brakes (in front side) by using
castor wrench.
2) Use the castor shims to level the cabinet, if necessary, by inserting them to
stems of the castors.
WASHER
BOLT
CASTOR(2EA)
CASTOR (WITH BRAKE)(2EA)
3
Master bilt
HANDLE