Muratec MFX-C4000 Field Engineering Manual page 114

3. Carefully remove the misfed paper in the
direction shown.
If the paper does not move when you pull, or if
you do not see any paper in this area, stop and
go to step 4.
4. Lift the front part of the tray up slightly to release
the tray from the machine.
Service Manual
Alignment & Troubleshooting
5. Remove the jammed paper by gently pulling it
straight out.
Once you remove the jammed paper here, open
the side cover and then close it to clear the error
message on the display.
6. Close the side cover and insert the paper tray.
Lower the rear part of the Tray to align the rear
edge with the corresponding slot of the machine,
then insert it completely.
4-8