Nimbus Water Systems Sierra Owner's Manual & Installation Manual page 8

INSTALLATION
2
Parts
Sierra Manifold Unit
A. Pre-filter
B. Carbon post-filter
C. Reverse osmosis membrane filter
D. Cartridge Retainer clips (3)
E. Drain saddle unit
F. Feed water connection assembly
(shown with shut-off valve attached)
Parts Kit (not shown)
1/4" plastic tubing insert
1/4" plastic ferrule
Date of Installation labels (3)
Feed valve warning tag
Feed shut-off warning label
Self tapping mounting screws (2)
Flat rubber washer
Gray rubber cone
Faucet Kit (not shown)
Tubing (not shown)
6' white 3/8" tubing
4' blue 3/8" tubing
4' green 1/4" tubing
4' yellow 1/4" tubing
The feed water connection assembly supplied with the Sierra system includes components which represent the most
common under-sink plumbing connections currently in use within the United States. If these components do not
match the type of connections installed at your location, contact a local hardware or plumbing supplier to obtain the
correct fittings.
D
A
E
8
B
C
F