Ventilation - Miele CVA 6800 Operating And Installation Instructions

Ventilation

Condensate can damage the coffee
machine or the housing unit.
The ventilation gaps given must be
observed.
Do not cover or block the ventilation
gaps.
Dust the ventilation gaps regularly.
Steam which is created when water is
heated up can condense on the interior
and the inside of the front of the coffee
machine.
During installation, ensure there is suffi‐
cient ventilation at the rear of the appli‐
ance so that steam and warm air are
able to escape without hindrance.
The housing unit should be configured
as follows:
– Air intake  occurs via the plinth at
the bottom of the machine and the
air escapes at the top  at the rear
of the housing unit.
– A ventilation gap of at least 40 mm
depth must be allowed for behind the
appliance for air to circulate.
– The ventilation cross-sections in the
plinth, housing unit and above the
appliance must amount to at least
2
200 cm to ensure that air can circu‐
late without hindrance.
Top ventilation cross-section
The top ventilation cross-section can
be achieved in various ways:
a directly above the coffee machine
with a ventilation grille (free air flow
of at least 200 cm
b in between the housing unit and the
ceiling
c through a suspended ceiling.
Installation
2
)
95