Miele CVA 6800 Operating And Installation Instructions page 67

Dismantling the milk flask lid and
cleaning it with the cleaning brush
Milk fat deposits can collect in the milk
flask lid. These will cause the milk to
sputter when milk froth is being made.
 Pull the milk suction tube out of the
milk flask lid. Make sure you remove
the seal  as well.
 Clean both parts under warm running
water.
Insert the cleaning brush supplied in
the stainless steel tube and move it
back and forth until all milk residues
have been removed.
Cleaning and care
 Also use the cleaning brush to clean
the milk pipework in the lid from
above and below.
To reassemble the lid:
 First insert the seal in the lid.
Make sure you do not fit the slanted
end of the milk intake tube into the
seal. This would damage it.
 Fit the milk intake tube into the seal.
67