Switching The Coffee Machine On And Off - Miele CVA 6800 Operating And Installation Instructions

Switching on
When the coffee machine is switched
on, it heats up and rinses the pipework.
This not only cleans the pipework, but
also warms it before coffee is prepared.
If the coffee machine still has an oper‐
ating temperature which is higher than
60 °C, rinsing will not take place.
 Touch the On/Off sensor .
The appliance will begin rinsing after
the heating-up phase. Hot water will
come out of the central spout.
You can now prepare drinks.
Useful tip: Tip: If you do not want the
water from the rinsing process to flow
into the drip tray, place a suitable con‐
tainer (e.g. the small cleaning container)
underneath the central spout before
preparing the first coffee of the day.

Switching the coffee machine on and off

Switching off
 Touch the On/Off sensor .
If coffee has been dispensed, the cof‐
fee machine will rinse the coffee pipe‐
work automatically before switching off.
Switching off for longer peri‐
ods of time
If the coffee machine is not going to be
used for a longer period of time, e.g.
whilst on holiday:
 Empty the drip tray, the waste con‐
tainer and the water container.
 Clean all components thoroughly, in‐
cluding the brew unit, the central
spout connector and the small drip
tray located inside the door.
 Switch off the appliance.
If the appliance door is to be left
open for a long time, it is advisable
to switch off at the wall or the fuse to
save energy.
29