Event Monitoring; Figure 44 : Ptz Preset Menu - PACOM PDR960H-8HD User Manual

< Set Preset > < Move to Preset >

Figure 44 : PTZ Preset menu.

While in the PTZ mode, pressing the
displaying at the top of the screen displays the Advanced PTZ menu.
Set the feature you wish to control by selecting it from the menu. Refer to the camera manufacturer's
instructions for the proper settings. Depending on the camera specifications, some features may
not be supported.
You can use a mouse for convenient PTZ control. Click the left mouse button on the image and move that image in
the direction you want to by dragging the mouse. Use the mouse wheel to zoom in and out. Position the mouse pointer
at the bottom of the screen, and the following PTZ toolbar will display.
Clicking
the mouse pointer at the bottom of the screen. Change the toolbar location by clicking the
empty space on the left side of the toolbar and drag it to where you want it located on the
screen. Use the arrow buttons on the toolbar to pan or tilt the camera in the direction you
want. The other controls on the toolbar perform as described below:

Event Monitoring

When an event occurs, the DVR will display the camera associated with the event and the icon
if Event Monitoring is selected in the Display setup screen (Primary Monitor tab).
How the cameras are displayed depends on the number of cameras associated with the event. If one camera is associated
with the event, the DVR will display the camera full screen. If two to four cameras are associated with the event, the
DVR will display the cameras on a 2x2 screen. If five to nine cameras are associated with the event, the DVR will
display the cameras on a 3x2 or 3x3 screen. If 10 or more cameras are associated with the event, the DVR will display
the cameras on a 4x3, 4x4 or 5x4 screen.
Event monitoring lasts for the dwell time set for event recording. After the dwell time has elapsed, the monitor returns
to the previous screen unless another event has occurred. If you want to return to the live monitoring mode before the
dwell time has elapsed, press the
You can save camera position settings as "presets" so that you can go directly
to desired views.
Once you have the camera at the desired settings, press the
the Set Preset dialog box will appear. Select the number you want to assign
to the preset and press the
preset name.
Press the button to load the PTZ preset and the Move to Preset dialog box
will appear. Select the desired preset and press the
MENU
on the left side exits the toolbar. If you want to display the toolbar again, position
Zoom In / Out
Iris Open / Close
Advanced PTZ
button or one of the camera buttons.
DISPLAY
button. Use the virtual keyboard to enter the
button and selecting (Advanced PTZ) in the menu
Focus Near / Far
Set / Load Preset
Digital Video Recorder
button, and
button to load the preset.
displays on screen
59