Remove The Cpu Cooler; Begin To Install The Cpu - AOpen EPC945-M8 Manual

Remove the CPU Cooler

Your system may come with or without a CPU cooler depending on the various
configurations marketed by your distributor. The CPU cooler is fixed to the motherboard
with four screws. Removing the screws with a screw driver with magnetic tip will make
the job a lot easier.
Detach the 4-pin CPU fan power cable from its connector on the motherboard.

Begin to Install the CPU

To install the CPU, you have to remove the CPU plastic protective cap first. You have to
press the steel CPU socket lever down and move it sideways to release the L-shaped lever.
The plastic CPU cover will come off.
17