Chapter 3: Mounting
Rear VESA Mount
For the 10-inch touchmonitor, a four-hole 75x75mm and 100x100mm mounting pattern
available.The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C and VESA MIS-B,
100, C.
For the 15-inch touchmonitor, a four-hole 75x75mm and 100x100mm mounting pattern for M4
screws is provided on the rear of the monitor. Remove the stand using a Phillips screwdriver to
access this mounting interface. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75,
C and VESA MIS-B, 100, C.
.
User Manual: 1002L, 1502L
UM600012 Rev A, Page 9 of 25