Memory Operation; Memory System Operation; Memory Storage - Yaesu FTA-230 Operating Manual

The FTA-230 provides 150 user-programmable "Main"
memories, labeled "CH-001" through "CH-150,"
and up to 100 pre-programmed memories, designated
"Book" Memories. The "
"Book" Memory Mode is activated.
The Main memories and "Book" Memories can be as-
signed alpha-numeric names of up to eight characters.

Memory System Operation

The FTA-230's Main Memory system allows the user
to store, label, and recall channel frequencies which
you may want to use frequently. You may store VFO
frequencies, Book Memory frequencies, and/or Weather
Channel frequencies (USA version only) into the Main
Memory system.
28
m
emory
" icon appears when the
o
peratIon

Memory Storage

 Select the desired frequency in the VFO mode, or
recall the Book Memory channel or Weather chan-
nel to be stored in the Main Memory.
 Press and hold in the
[ MW ( SPL-W )] key for
2 seconds. The memo-
ry channel number will
blink on the LCD.
 W i t h i n f i v e s e c -
onds of pressing the
[ M W ( S P L - W ) ] k e y,
rotate the DIAL selector
knob to select the desired
memory channel number
for storage. In order to prevent writing over memory
channels, an "underline" will appear under the hy-
phen (located between "CH" and the channel num-
ber) to indicate a vacant memory channel.
 Now press and hold in the [ MW ( SPL-W )] key for
2 seconds; you will now see blinking "A" on the
LCD. To attach an alpha/
numeric name (label) to
the memory, proceed to
the next step; otherwise
FTA-230 O M
perATing AnuAl