Flip-Flop Feature (Frequency Recall) - Yaesu FTA-230 Operating Manual

Flip-Flop Feature (Frequency Recall)

The FTA-230 can memorize up to 10 operating frequen-
cies automatically, and recall them for later use.
Up to 10 frequencies may be memorized. Once all 10
memories have data in them, previous data (starting with
"R0") will be over-written, on a first-in, first-out basis.
Recall Frequency
 Press the [ ENT ( )] key several times to select
" - VFO - " mode.
( SET )] key to select " - F/F - " mode
 Press the [
on the VFO mode. You
will see the previously
selected recall number
appearing on the LCD.
 Rotate the DIAL selector knob
key to select previously stored frequencies.
[ 0R ] [ 1R ] [ 2R ]
ó ó
[ 9R ] [ 8R ] [ 7R ]
ó ó
 To exit the Flip-Flop mode, press the [
key to return to the VFO mode.
FTA-230 O
perATing
B o
asIc
or press the [  ] / [  ]

[ 3R ] [ 4R ]
ó ó
[ 6R ] [ 5R ]
ó ó
( SET )]
M
AnuAl
peratIon
Erasing the memorized Frequencies
 Recall the memorized frequency that you wish to
erase using the DIAL selector knob
[  ] / [  ] key.
 Press the [ F ] key momentarily, then press and hold
in the [ ( SET )] key to erase the memorized fre-
quency.
: If you change the function of DIAL and [  ] /
[  ] key by pressing the [ F ] key followed by the
[ 5 ( DIAL/  )] key, you may select the previous
frequency by pressing the [  ] / [  ] key.
 or press the
17