Yaesu FTA-230 Operating Manual page 45

[ RSAV ]
Function: Selects the Receive-mode Battery Saver
"sleep" ratio.
Available Values: 1:1 ~ 1:5/oFF/ABS
Default Setting: 1:1
The setting of 1:5 will promote the greatest conservation
of battery capacity, but the receiver's response time to
incoming calls will be slowed somewhat.
ABS: Automatic Battery Saver, based on activity on
the receiver.
Note: This feature does not operate during Scan or Dual
Watch.
[ LAMP ]
Function: Display and Keypad Illumination Mode.
Available Values: KEY/oFF/CNT
Default Setting: KEY
"KEY" mode: The illumination lamp will be activated
for 5 seconds when any front panel key
or the DIAL knob is operated.
"oFF" mode: Disables the illumination lamp.
"CNT" mode: Illuminates the Display/Keypad continu-
ously.
FTA-230 O
perATing
( "s
m
enu

M
AnuAl
" ) m
et ode
[ SFT ]
Function: CPU Clock Shift.
Available Values: on/oFF
Default Setting: oFF
This function is only used to move a spurious response
"birdie" should it fall on a desired frequency. Consult
your Yaesu dealer for details regarding this function.
[ PRTM ]
Function: Selects the Priority Checking Time.
Available Values: 05/10/15/20/25/30 (0.5/1/1.5/2/2.5/3
sec.)
Default Setting: 20 (2 seconds)
This Menu item allows you to define how often the Pri-
ority Channel will be checked for activity.
Note: The Dual Watch Polling time is 500 mS (fixed).
[ DWMD ]
Function: Selects the Dual Watch/Priority Function.
Available Values: DW/PRI
Default Setting: DW
"DW" mode: The FTA-230 will activate the Dual
Watch feature when you press the [ F ] key
followed by the [ 6 ( DW )] key.
"PRI" mode: The FTA-230 will activate the Priority
feature when you press the [ F ] key fol-
lowed by the [ 6 ( DW )] key.
43