Reception of Weather Channel Broadcasts
The FTA-230 can receive VHF Weather Channel broad-
casts, which may assist your flight planning. The FTA-
230 includes a ten-channel auto-search feature, which
simplifies access to Weather Channels when you are in
an unfamiliar location.
To r e c e i v e We a t h e r
Channels, press the
[ ENT (
)] key (re-
peatedly, if necessary)
to select the Weather
C h a n n e l m o d e . I n
the Weather Channel
mode, " - WX - " will ap-
pear on the display.
The FTA-230 will now
scan quickly through the
ten standard Weather Channels, and will stop on the
first active station found.
If there are two or more weather channels audible in
your area, you may select the alternate channel(s) by
pressing the PTT switch. Pressing the PTT switch
re-initiates the scanning process.
FTA-230 O
perATing
a
dvanced
(USA version only)
M
AnuAl
o
peratIon
If there are no Weather Channels in your area, the
scanner will not stop. Press the [ MONITOR ] button
to stop the scanner.
You can also select Weather Channels manually by
rotating the DIAL selector knob
To confirm the current Weather Channel frequency,
press the [
( SET )] key
momentarily. The display
c h a n g e s t o f r e q u e n c y
indication. Press the [
( SET )] key again to return to normal display.
To exit the Weather Channel mode, press the
[ ENT (
)] key momentarily to return to the VFO
mode.
: If you change the function of DIAL and [ ] /
[ ] key by pressing the [ F ] key followed by the
[ 5 ( DIAL/ )] key, you may select Weather Chan-
nels by pressing the [ ] / [ ] key.
Note 1: In the event of extreme weather disturbances,
such as storms and hurricanes, the NOAA (Na-
tional Oceanic and Atmospheric Administra-
tion) sends a weather alert accompanied by a
1050 Hz tone and subsequent weather report
on one of the NOAA weather channels. You
may setup the Alert function when receiving the
.
19