Side Tone Feature - Yaesu FTA-230 Operating Manual

The FTA-230 also provides for adjustment of the
"Hang-Time" of the VOX system (transmit-receive de-
lay after the cessation of speech) via the Menu. The de-
fault delay is one second. To set a different delay time:
 Press the [ F ] key momentarily, then press the [
( SET )] key to activate
t h e M e n u ( " S E T " )
mode.
 Rotate the DIAL selec-
tor knob to select Menu
Item "VDLY."
 Press the [ ENT (
key to enable adjustment
of this Menu item.
 Rotate the DIAL selector
knob to select the delay
time among "05," "10," "15," and "20" (representing
0.5, 1.0, 1.5, and 2.0 sec).
 When you have made your selection, press the
[ ENT ( )] key to save the new setting, and then
press the PTT switch to exit to normal operation.
26
a
dvanced
)]
o
peratIon

Side Tone Feature

When using the after-market Headset, you may monitor
your transmitted voice from the headset for monitoring.
To set the side tone (monitor) level:
 Press the [ F ] key mo-
mentarily, then press
t h e [ ( S E T ) ] k e y
to activate the Menu
("SET") mode.
 Rotate the DIAL selec-
tor knob to select Menu
Item "STLV."
 Press the [ ENT (
to enable adjustment of
this Menu item.
 Rotate the DIAL selector knob to select the desired
monitoring level (1, 2, or 3).
 When you have made your selection, press the
[ ENT ( )] key to save the new setting, and then
press the PTT key to exit to normal operation.
FTA-230 O
( )
monitoring your voice
)] key
M
perATing AnuAl