Customer Programmable Features - Uconnect; 8.4 Settings - Dodge Challenger SRT Hellcat 2015 Owner's Manual

Customer Programmable Features — Uconnect®

8.4 Settings

Press the "SRT & Apps" button on the touchscreen, then
press the "settings" button on the touchscreen to display
the menu setting screen. In this mode the Uconnect®
system allows you to access programmable features that
may be equipped such as Display, Clock, Safety &
Driving Assistance, Lights, Doors & Locks, Auto-On
Comfort & Remote Start, Engine Off Options, Compass
Settings, Audio, Phone/Bluetooth®, SiriusXM Setup, Re-
store Settings, Clear Personal Data, and System Informa-
tion.
NOTE:
• Only one touchscreen area may be selected at a time.
• Depending on the vehicles options, feature settings
may vary.
UNDERSTANDING YOUR INSTRUMENT PANEL 247
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired mode,
press and release the preferred setting until a check-mark
appears next to the setting, showing that setting has been
selected. Once the setting is complete, either press the Back
Arrow button on the touchscreen to return to the previous
menu, or press the "X" button on the touchscreen to close
out of the settings screen. Pressing the Up or Down Arrow
button on the right side of the screen will allow you to
toggle up or down through the available settings.
Display
After pressing the "Display" button on the touchscreen
the following settings will be available:
• Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, press and re-
lease the "Manual" or "Auto" button on the touchscreen.
Then press the back arrow button on the touchscreen.
I n f o r ma t i o n P r o v i d e d b y :
4