Dodge Challenger SRT Hellcat 2015 Owner's Manual page 243

Peak G-Force
When selected, this screen displays all four G-Force
values (two lateral and two longitudinal).
• When a force greater than zero is measured, the
display will update the value as it climbs. As the
G-Force falls, the peak forces will continue to display.
• Pushing the OK button will clear the peak force
values.
Lap Timer
When selected the Lap Timer page will show the timer
always at 0:00.00 with the previous Best and Last time
data (unless the driver has cleared it via hold to Reset).
• Pushing OK will start "current" timer from 0:00.0
• When OK is pushed the times are updated accord-
ingly.
UNDERSTANDING YOUR INSTRUMENT PANEL 241
• As soon as the driver exits the Lap Timer pages the
"current" timer will stop and the time will be reset to
0:00.00
• If the driver stays on the Lap Timer pages the "cur-
rent" timer will reset to 0:00.0 when ignition is placed
in the off position, or ignition placed in the ON
position (or will roll over at 59:59.99 if ever possible).
• Each time the driver pushes OK for a Lap that current
time populates the Last time and also populates the 1st
(top) space on the Timer History page the current time
resets to 0:00.0 at every push of the OK button.
• The timer will stop when the driver navigates away
from this page.
Lap History
When selected, this screen displays the Lap History, and
will color highlight the time that is the best time from the
Timer Page.
I n f o r ma t i o n P r o v i d e d b y :
4