Turning Fcw On Or Off; Changing Fcw Status - Dodge Challenger SRT Hellcat 2015 Owner's Manual

180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
WARNING! (Continued)
responsibility to avoid a collision by controlling the
vehicle via braking and steering. Failure to follow
this warning could lead to serious injury or death.

Turning FCW ON Or OFF

NOTE: The default status of FCW is "On", this allows
the system to warn you of a possible collision with the
vehicle in front of you.
The forward collision button is located on the switch
panel below the Uconnect® display.
To turn the FCW system OFF, press the forward collision
button once to turn the system OFF (led turns on).
To turn the FCW system back ON, press the forward
collision button again to turn the system ON (led turns
off).
Changing the FCW status to "Off" prevents the system
from warning you of a possible collision with the vehicle
in front of you.
NOTE: The FCW system state is kept in memory from
one key cycle to the next. If the system is turned OFF, it
will remain off when the vehicle is restarted.

Changing FCW Status

The FCW Sensitivity Settings are programmable through
the Uconnect® System. Refer to "Uconnect® Settings" in
"Understanding Your Instrument Panel" for further in-
formation.
The default status of FCW is the "Far" setting is the "On"
setting, this allows the system to warn you of a possible
collision with the vehicle in front of you when you are
farther away. This gives you the most reaction time to
avoid a possible collision.
I n f o r ma t i o n P r o v i d e d b y :