Dodge Challenger SRT Hellcat 2015 Owner's Manual page 370

368 STARTING AND OPERATING
Launch control will be active until the vehicle reaches
62 mph (100 km/h), at which point the ESC system will
return to its current ESC mode.
Launch control will abort before launch completion,
display "Launch Aborted" in the cluster and return to
ESC Full ON under any the following conditions:
• The accelerator pedal is released during launch. ESC
system continues in ESC Full ON.
• The ESC system detects that the vehicle is no longer
moving in a straight line. ESC system continues in ESC
Full ON.
• The "ESC OFF" button is pressed to change the system
to another mode. One press puts the ESC system into
ESC Full ON.
NOTE: After launch control has been aborted, ESC will
return to its current ESC mode.
Manual Transmission — If Equipped
Vehicles with a manual transmission have an adjustable
launch RPM controlled through the Uconnect® system.
Launch Control is only available when the following
procedure is followed:
1. Pressing the "LAUNCH" button on the center stack
switch bank.
NOTE: Pushing the SRT button on the center stack or
pressing the "SRT & Apps" button on the touchscreen are
two other options to access launch control features.
Please refer to "Uconnect® Settings" within your Own-
er's Manual on the DVD for further information.
2. Press the "Launch RPM Set-Up" button on the touch-
screen. This screen will allow you to adjust your
launch RPM's for optimum launch/traction.
3. Press the "Activate Launch Mode" button on the
touchscreen.
I n f o r ma t i o n P r o v i d e d b y :