Uconnect® Settings - Dodge Challenger SRT Hellcat 2015 Owner's Manual

Diagnostics — If Equipped
Push and release the UP or DOWN arrow button until
the diagnostic Menu where the Driver is able to view
certain vehicle faults.
• Push OK to have the 1st code in the stack sent
• There is a delay when the next diagnostic code is
requested during which the following message is
displayed:
• "Checking System for Diagnostic Codes"
• Driver must push the OK button again to see the next
Pcode otherwise current message remains displayed.
• Driver exits when they cycle to another submenu (up
or down).
• Faults are displayed from oldest to the newest.
UNDERSTANDING YOUR INSTRUMENT PANEL 245
• If the menu is exited before the end of codes is reached
- when the driver re-enters the list will be restarted
from the beginning.
• When no codes are present or the last code is reached
= (P000) and this message is displayed:
• "No Further or End of Diagnostic Codes"
Uconnect® SETTINGS
The Uconnect® system uses a combination of buttons on
the touchscreen and buttons on the faceplate located on
the center of the instrument panel that allows you to
access and change the customer programmable features.
I n f o r ma t i o n P r o v i d e d b y :
4