Dodge Challenger SRT Hellcat 2015 Owner's Manual page 87

Can the rear-facing child restraint touch
the back of the front passenger seat?
Can the head restraints be removed?
Can the buckle stalk be twisted to tighten
the seat belt against the belt path of the
child restraint?
Installing A Child Restraint With A Switchable
Automatic Locking Retractor (ALR)
1. Place the child seat in the center of the seating
position. For some second row seats, you may need to
recline the seat and/or raise the head restraint to get a
better fit. If the rear seat can be moved forward and
rearward in the vehicle, you may wish to move it to its
rear-most position to make room for the child seat.
You may also move the front seat forward to allow
more room for the child seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85
Yes Contact between the front passenger seat
and the child restraint is allowed, if the
child restraint manufacturer also allows
Yes Center Only may be removed
No Do not twist the buckle stalk in a seating
position with an ALR retractor.
2. Pull enough of the seat belt webbing from the retractor
to pass it through the seat belt path of the child
restraint. Do not twist the belt webbing in the seat belt
path.
3. Slide the latch plate into the buckle until you hear a
"click".
4. Pull on the webbing to make the lap portion tight
against the child seat.
I n f o r ma t i o n P r o v i d e d b y :
contact.
2