UCONNECT SETTINGS
The Uconnect system uses a combination of
buttons on the touchscreen and buttons on the
faceplate located on the center of the instru-
ment panel that allows you to access and
change the customer programmable features.
Uconnect 5.0 Buttons On Touchscreen And
Buttons On Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
Uconnect 8.4A/8.4AN Buttons On Touchscreen
And Buttons On Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
Buttons On The Faceplate
Buttons on the faceplate are located below the
Uconnect system in the center of the instrument
panel. In addition, there is a Scroll/Enter control
knob located on the right side. Turn the control
knob to scroll through menus and change set-
tings (i.e., 30, 60, 90), push the center of the
control knob one or more times to select or
change a setting (i.e., ON, OFF).
Your Uconnect system may also have a Screen
Off and Back buttons on the faceplate.
Push the Screen Off button on the faceplate to
turn off the Uconnect screen. Push the Screen
Off button on the faceplate a second time to turn
the screen on.
Push the Back button on the faceplate to exit
out of a Menu or certain option on the Uconnect
system.
Buttons On The Touchscreen
Buttons on the touchscreen are accessible on
the Uconnect display.
Customer Programmable Features
— Uconnect 5.0 Settings
Push the + MORE button on the faceplate and
then press the "Settings" button on the touch-
screen to display the menu setting screen. In this
mode the Uconnect system allows you to access
programmable features that may be equipped
such as Display, Units, Voice, Clock, Safety/
Assistance, Lights, Doors & Locks, Auto-On Com-
fort, Engine Off Options, Compass Settings, Au-
dio, Phone/Bluetooth, Restore Settings, Clear
Personal Data and System Information.
157