Yowza Navarre Elite Elliptical User Manual page 16

STEP4 ASSEMBLY
Step 4
706
STEP4-A). Slide the 20x79.9 Bolt (505) through the Wave Washer (521) & 0.5mm
Washer (494) , Pedal Arm, and Pedal Swing Arm (108) then secure by
8mm Allen Key (C).
STEP4-B). Secure the Back Out Screw (516) to the Pedal Swing Arm (108) using the
2.5mm Allen Key (A)
NOTE: PLEASE FULLY TIGHTEN Screw (516).
STEP4-C). Press the Pedal Arm Front Pivot Cover (702) into the ends of the Pedal
Arm.
706
http://www.yowzafitness.com/
470
503
405
505 X2
494 X2
521 X2
516 X2
707
515
15