Panel Bracket; Waterproof Seal, Touch Panel, Touch Cover, Lcd Panel - Partner SP-1000 Service Manual

Panel Bracket

Before proceeding, remove the
following FRUs.
• "SP-1000 Panel" on page 55.
• "Panel Back Cover" on page
56.
• "Speaker" on page 57.
• "Power Button" on page 58.
• "Heat Sink" on page 59.
• "I/O Shield" on page 61.
• "Mainboard" on page 62.
• "Inverter" on page 63.
1. Disconnect all cables.
2. Remove two screws.
3. Remove the panel bracket.

Waterproof Seal, Touch Panel, Touch Cover, LCD Panel

Before proceeding, remove
the following FRUs.
• "SP-1000 Panel" on page
55.
• "Panel Back Cover" on
page 56.
• "Speaker" on page 57.
• "Power Button" on page
58.
• "Heat Sink" on page 59.
• "I/O Shield" on page 61.
• "Mainboard" on page 62.
• "Inverter" on page 63.
• "Panel Bracket" on page
64.
1. Remove four screws from
the panel bracket.
2. Remove the LCD panel.
3. Remove the touch cover
panel.
4. Remove the touch panel.
5. Remove the waterproof
seal.
64 C H A P T E R 5 R E P L A C I N G F I E L D R E P L A C E A B L E U N I T S ( F R U s )
Touch Panel
Waterproof Seal
LCD Panel
Touch Cover
Panel Bracket