Inter-m SYSTEM-2240G Operation Manual page 9

2. TUNER SECTION
1. TUNING FREQUENCY DISPLAY
You can confirm the frequency of tuner through this display.
2. BAND SELECT BUTTON
These switch is for selecting AM or FM, when using the tuner.
3. ADDRESS SELECT BUTTON
These switches select six memory address banks for the storage of broadcasting frequencies. Each of these
banks can be hold five broadcasting frequencies at designated memory address areas, i.e., F1, F2, F3, A1
and A2. Therefore a total of thirty broadcasting frequencies can be stored.
4. UP/DOWN BUTTON
When the switch is momentarily pressed once, the AM/FM frequency will adjust with a single UP/DOWN count.
When the switch is pressed continuously, the frequency is continuously fast UP/DOWN counted.
5. MEMORY BUTTON
This is for memorizing the broadcasting frequency.
1. Select the memory area AM or FM with the BAND switch (2).
2. Select the frequency that you want to memorize with the UP/DOWN switch (4).
3. Press the MEMORY switch (5), then select the desired address with ADDRESS switch (3).
4. The present status of the tuner will be memorized in the selected address.
6. POWER SWITCH
Pressing this switch to ON, will light and supply the power to this unit.
F1
MULTI P.A COMBINATION
7
SYSTEM-2240G