How To Use Cd / Mp3 Player - Inter-m SYSTEM-2240G Operation Manual

MULTI P.A COMBINATION

How to Use CD / MP3 Player

How to Use CD / MP3 Player
Power ON/OFF
- When there does not exist a disc upon power-on:
1. If power is applied to CDP,
2. Push the CD softly until the tray pulls on the CD.
3. While the unit reads CD,
4. For MP3 CD,
5. After the unit searches the music information on a CD (for about 10 seconds),
displayed, keeping a standby status.
6. Press the switch to start operation. Then playback is started from the first song on a CD.
- When there exists a disc upon power-on:
1. While the unit reads CD,
2. For MP3 CD,
3. After the unit searches the music information on a CD,
status.
4. Press the switch to start operation. Then playback is started from the first song on a CD.
- LCD DISPLAY OFF
1. If press STOP
STOP
2. Please press any key in case of turns on LCD DISPLAY power again or push the CD to DISC TRAY.
Functions
- PLAY Function
1. Insert a CD, and press
2. When MP3 CD is played,
- PAUSE Function
1. If you stop playing at the current position temporarily, press
2. While this pause function is active,
3. If you press
PLAY/PAUSE
the current position.
4. While the pause function is active, you can move between directories or tracks. If, however, you make
such movement, the pause function is released, and the unit starts playing automatically.
- SCAN Function
1. You can use this function to search a desired song by hearing the first part of each track.
2. If you press
track for 10 seconds.
3. If you press
PAUSE
PLAY/PAUSE
a CD.
4. While the track is performing a search function,
5. If you find a desired track, press
6. In case of MP3, if you long-press
ed, and the unit plays the beginning part of each file in the directory for 10 seconds.
12
SYSTEM-2240G
message is displayed, keeping a standby status.
NO DISC
message is displayed.
S -- CDP-- -- --
message is displayed.
READING CD ROM
message is displayed.
S -- CDP-- -- --
message is displayed.
READING CD ROM
switch in case of NO DISC
NO DISC
switch after CD information is displayed.
PLAY/PAUSE
is displayed on the left top of LCD display.
MP3
S -- PAUSE
switch once more, the pause function is released and the unit starts playing from
switch in the course of playing, the unit plays the beginning part of each subsequent
SCAN
switch in a stop status,
SCAN
switch, the unit plays the beginning part of each track for 10 seconds from the first track of
SCAN
SCAN
message is displayed, keeping a standby
CD STOP
was registered in LCD DISPLAY window, LED power turns off.
PLAY/PAUSE
message is displayed.
message is displayed, and then if you press
INTRO
message is displayed.
D -- INT NO.
switch once more to stop searching and start playing.
switch for more than 1 second,
message is
CD STOP
switch.
PLAY/
message is display-
D -- INT NO.