Connecting The Speakers - Inter-m SYSTEM-2240G Operation Manual

Connecting the Speakers

Connecting the Speakers
Before connecting speakers, make sure the unit is switched off. Connect the speakers as shown below.
- FOR LOW IMPEDANCE OPERATION
Remove the Shorting Connector from between the OPT IN and LOW IMP. OUT terminals.
Connect as per low impedance distributed system, as shown below.
- FOR HIGH IMPEDANCE OPERATION
Insert the Shorting Connector between the OPT IN and LOW IMP. OUT terminals.
Connect each individual speaker as shown below.
Be certain that the total combined impedance is not less than the unit's rated impedance, as shown below:
SYSTEM-2240M
100V
41Ω
MULTI P.A COMBINATION
MATCHING MATCHING
TRANS
70V
21Ω
SYSTEM-2240G
TRANS
25V
2.6Ω
19