MasterCraft 058-8179-2 Instruction Manual page 9

9
Note: Recycle unwanted materials rather than disposing of it as waste. Sort the tools, hoses, and
packaging in specific categories and take to the local recycling center or dispose of it in
environmentally safe way.
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• Disconnect the tool from the air supply and turn off the
compressor before performing any maintenance, or changing
accessories, when the tool is not in use, when it is being
handed over to another person, and when it is left
unattended. Failure to comply may result in moderate injury
or damage to equipment.
Use safety goggles and ear protection:
•
Wear safety glasses with side shields when operating the
tool/compressor and verify that others in the work area are
also wearing safety glasses. Safety glasses must conform to
American National Standards Institute (ANSI Z87.1)
requirements and must provide protection from flying
particles from the front and the sides.
Air-powered tools are loud and the sound can cause hearing
damage. Always wear ear protection to prevent hearing
damage and loss. Failure to comply may result in moderate
injury.
AIR-POWERED COIL ROOFING NAILER 058-8179-2
MC-588179-16
MC-OM-01