Led Indicator - Telstra T-VOICE502 User Manual

Handset display symbols
The following symbols are displayed on your handset.
Coverage symbol
Reception displayed when the handset is
within range of the Gateway. Flashes yellow
when out of range of the Gateway or not
registered with the Gateway.
Alarm set
Indicates that the alarm is set.
Handsfree on
Indicates that handsfree speaking is activated.
Ringer off
Indicates that the ringer is switched off.
Keypad lock
Indicates that the keypad is locked.
Battery full
Indicates that the batteries are fully charged.
Battery empty
Indicates that the batteries are almost discharged.
Missed calls
Displayed if you have missed calls in the calls list.
You have messages.
Displayed if you have new voice messages.
* * You must have Telstra's Messagebank or Telstra
Home Messages 101 service activated to access your
voice messages.

LED indicator

Your TELSTRA T-VOICE 502 handset has a LED indicator allowing you to know the status of your phone.
Solid green
Flashing green on dock
Flashing blue
Solid red off dock
Flashing red off dock
To stop the LED flashing blue, open the Call Log and scroll through your missed calls and/or listen to
your Voice messages. To stop the LED flashing red, place the handset into the charging cradle.
Home number
Mobile number
Office number
Symbols presented in the Contact and Call List
indicate the phone number type.
- Batteries near to fully charged.
- Batteries charging.
- You are receiving an internal or external call.
- You have one or more missed calls.
- You have one or more voice messages.
- You are receiving a software update.
- Low charge.
- Very low charge, batteries need charging.
4