Activate Handsfree Operation; Receiving Calls; Making A Phone Call; Ending A Call - Telstra T-VOICE502 User Manual

MAKING AND

RECEIVING CALLS

Making a phone call

First, enter the number. Press
• delete it by pressing repeatedly the softkey under CLEAR: short press to delete characters / long press to
delete the entire number.
• move the cursor to the desired character by pressing the navigation key (left/right).

Ending a call

Press or replace the handset in the charger.

Accepting a call

The caller's number will be displayed if you have Calling Number Display (CND) activated. The name is
displayed if saved in the Contacts.
Press to accept the call.
To check the status of your CND, or to activate this service, order online at www.telstra.com or call 132200.
Handsfree operation
You can use the handsfree function to conduct calls without holding the handset in your hand and allow
others present in the room to take part in the call.
Activating handsfree before a call:
1. Enter the desired phone number.
2. Press twice. The display shows
3. Press to deactivate handsfree speaking.
Switching to handsfree speaking during a call:
1. Press .
2. To deactivate handsfree speaking press
• Do not hold the handset close to your ear during handsfree operation, the loudspeaker
volume can be very high.
• If you have activated handsfree operation during a call, you can replace the handset in the charger
without ending the call.
to dial the number. If you enter an incorrect number, you can:
and you can hear the ringing signal over the handset loudspeaker.
one more time.
20