Contents Of The Package; Connecting The Charger - Telstra T-VOICE502 User Manual

PREPARING THE
HANDSET

Contents of the package

T-Voice Power
502 handset
Power up the handset
Inserting the rechargeable batteries
The bottom part of the handset contains a battery compartment
for housing two type AAA batteries.
Removing the battery compartment cover
Slide the battery compartment cover downwards and lift it up.
Insert the batteries in the battery compartment. Make sure the polarity is
correct. Insert the batteries so that the flat end (negative polarity) of the battery
is pressing against the spring. The handset will not function if the batteries are
incorrectly inserted, and this may result in damage.

Connecting the charger

Insert the AC adaptor plug into the socket on the charging unit. Then connect the AC adaptor to the
power outlet.
• Your handset will not function if the power supply is not correctly connected, or during a
power failure (no emergency mode).
• The telephone cord must pass under the charging cradle to assure its proper standing.
• Position the charging cradle in a clean, dry and well-aired location. The ambient temperature
must be between 5 °C and 40 °C.
!
Safety note
Use only the following supplied power supply:
- MN-A002-A145 ; 7.5 V, 300mA from MEIC
Charging
Telephone
cradle cord
2xAAA Quick
batteries start guide
10