Charging The Batteries - Telstra T-VOICE502 User Manual

Charging the batteries

The batteries will take approximately 14 hours to fully charge, before the handset is ready for first use.
• For proper operation of the handset the batteries must be fully charged initially.
• Do not insert the handset in the charger without batteries.
• Do not use any other type of charger since this may damage the batteries.
The following symbols indicate the charging status on the handset display:
"high" "medium"
Please note: after you have inserted the batteries for the first time, the battery display will indicate
the correct information on the charging status only after a complete charging cycle. Use only approved
rechargeable batteries NiMH AAA. Never use disposable batteries/primary cells.
Approved models: - HFR-44AAAJ800 from HIGHPOWER
• You can replace the handset in the charger after every call. Charging is electronically controlled to
ensure optimal charging of batteries in different charge states. Avoid removing the batteries from the
handset for no good reason, since this affects the optimum charging cycle.
• You can use the telephone for up to 10 hours with fully charged batteries. The handset has a standby
time of up to 150 hours.
• If the battery charge status has reached its lower limit, the battery symbol (
and a warning signal is heard. You have only a few minutes of talk time left.
Select your language
When the batteries have been inserted for the first
time the language choice appears.
1. Use the arrow keys to select your language.
2. Select OK to confirm.
"low" "requires charging"
11
) flashes in the display
Deutsch
Français
Italiano
English
Back OK