Handset Settings; Handset Names - Telstra T-VOICE502 User Manual

SETTINGS
1. Press the softkey under MENU. Scroll to SETTINGS using
2. You have then the following options:

Handset settings

• Contrast - Select the desired contrast level.
• Screen timeout - By selecting On, the handset screen will turn off after 1 minute of idle time.
• Wallpaper - Select your desired wallpaper. You can see the available wallpapers by pressing the softkey
under PREVIEW.
• Auto talk - If you activate this function, you can accept a call simply by lifting the handset from the charger
without pressing any key.
• Keypad backlight - Turn the function on or off.
• Led indicator - Turn the function on or off.

Handset names

All registered handsets are displayed (Phone 1, Phone 2 ..). To better distinguish between handsets, you can
change the handset names.
Language
Set the preferred display language. Display texts will appear in the selected language.
Registration
You can register additional handsets with the Telstra gateway. The Telstra gateway must be within range.
If you purchase additional handsets
• you must have a compatible Telstra gateway available for this handset.
• the handsets must be registered with the gateway before use!
1. Press the softkey under MENU. Scroll to SETTINGS using
2. Scroll to REGISTRATION using
3. Select REGISTER HANDSET and press OK to confirm.
4. PRESS AND HOLD THE DECT BUTTON ON THE GATEWAY FOR 5 SECONDS appears. Press and hold down
the DECT button on the Gateway for five seconds. The DECT button is located on either the back or side of
your gateway.
5. Release the DECT button. If the registration is successful the handset is assigned the desired handset
name (e.g. PHONE 1). If the registration is not successful, repeat the procedure.
and press OK to confirm.
32
and confirm with OK.
and press OK to confirm.