Wiring Your Gateway - Telstra T-VOICE502 User Manual

WIRING YOUR
TELSTRA GATEWAY
If you have back to base alarms or are a Priority Alert customer it is recommended that you contact
Telstra on 132200 to arrange for a Telstra Technician to set up your phone service. Additional
technician callout charges may apply.
Prior to using the T-Voice 502 handset you need to ensure that your compatible Telstra gateway is set up to
make and receive phone calls.
Telstra Gateway Max Setup
A) Telstra NBN Customers
• If you have had a Telstra Broadband (NBN) service installed at your premise you will not be required to
perform any additional wiring on the Telstra Gateway Max. Once you have linked your T-Voice 502 to the
gateway you will be able to make and receive calls.
• If you have had a Telstra Broadband (NBN) service installed that did not require any NBN equipment to be
installed at your premise, follow the same instructions as the Telstra Broadband (ADSL) service
B) Telstra Broadband NBN with Existing Phone
• If you have an existing phone you would like to continue to use, insert the phone cable of the existing phone
into the green phone socket on the back of the Telstra gateway, as shown below.
13