Turn On Keypad Lock; Locate A Mislaid Handset; Redial Last Dialled Numbers; Internal Calls - Telstra T-VOICE502 User Manual

Redial
You can call the last dialled number by simply pressing the Redial button
Dialled calls list will be established.
Group call (paging)
You can activate a group call to locate a mislaid handset.
1. Press the DECT key on the gateway. All the handsets registered to the gateway will ring.
2. Press the DECT key again to end the ringing signal or press
Keypad lock
1 2
abc
If you want to carry the handset around in your pocket, you can activate the key lock. This prevents you
4 5
ghi jkl
inadvertently dialling a number.
7 8
pqrs tuv
1. Press and hold down
*
0
Aa
Redial
2. To unlock the keypad, press the softkey under UNLOCK, then press
If the keypad is locked,
• you can dial emergency numbers and incoming calls can still be accepted.
• you cannot dial a number or access menus.
1 2 3
abc def

Internal calls

1 2 3 4 5 6
abc def ghi jkl mno
4 5 6 7 8 9
ghi jkl mno pqrs tuv wxyz
You can call other handsets which are registered with the gateway. This allows you to make internal calls.
*
7 8 9 0 #
pqrs tuv wxyz Aa
Press the internal key
*
0 #
Redial Internal
Aa
internal key automatically dials the second handset if only two handsets are registered with the gateway.
Redial
Internal
Press to end the call.
Internal calls to T-Voice enabled devices
To initiate an internal call to a T-Voice enabled device, press CONTACTS, select the T-Voice enabled device
from the list, and press the green call key
Refer below for internal call shortcuts:
• Dial **0 to ring all devices connected to the gateway
• dial 1** to 7** to individually call an individual smart phones/tablets with T-Voice installed.
• dial **1 to **6 to call an individual T-Voice 502 handset
• dial **7 to call the phone wired to the gateway through the green phone socket
• dial **8 to call the other phone wired to the Gateway through the green phone socket
(Telstra Gateway Max only)

Call waiting

With this service you can have a telephone conversation and still be informed that someone else is calling
you. If a second call (internal or external) comes in you will hear the "Call waiting" tone and you can answer
) or reject the call (press the softkey under REJECT).
the call (press key
Press the softkey under OPTIONS. You have then the following options:
• Accept/End: Accept the waiting call, end the active call.
• Accept/Hold: Accept waiting call, active call is put on hold.
If you have two active calls:
• Press the left softkey under TOGGLE to switch between callers.
To be able to answer a call waiting, you must have Caller Number Display (CND) activated. To check the
status of your CND, or to activate this service, order online at www.telstra.com or call 132200.
3
def
6
mno
9
wxyz
. The display shows KEYPAD LOCKED.
#
Internal
, select the desired handset, from the list and confirm with OK. Pressing the
1 2
4 5
ghi
7 8
pqrs
*
0
Aa
. A call to the last entry in the
Redial
on one of the handsets.
1 2 3
abc def
4 5 6
ghi jkl mno
7 8 9
pqrs tuv
wxyz
.
*
0 #
Aa
Redial Internal
22
3
abc def
6
jkl mno
9
tuv
wxyz
#
Internal